OTT Hydromet

Operating instructions OTT cable way for hydrological surveys

Download

Leaflet - OTT Cable Way Systems

Download

OTT MF pro - Hessenhauhoehle - Video DE-EN

Watch on Youtube

Operating Instructions Precipitation gauge OTT Pluvio² S

Download

OTT Pluvio² S – Firmware - EN

Version: V 1.06.2

Comments

Pluvio² S – Firmware
OTT Pluvio² S – Firmware
V 1.06.2
E
2024-01-23
This firmware version is not suitable for OTT Pluvio² 200 (RH) and OTT Pluvio² 400 (RH) (former generation of devices)! Use only the OTT Pluvio² operating software version 1.08.1 or higher for the update! The update is identic for all Pluvio²S versions (OTT Pluvio²S 200, OTT Pluvio²S 200 RH) After attaching the USB interface, the OTT Pluvio²L/S interrupts communication on the other interfaces! It is mandatory NOT to interrupt the " OTT Pluvio²L/S <-> PC"-connection during the update! How to install the update: If not done so far: install USB interface driver and OTT Pluvio² operating program on a PC (recommended: notebook). (For more information see chapter 7.6, section "Preparation" of the OTT Pluvio² S manual.) Download the file "7003030293_Vxxxx_Pluvio2_L_S.bin" to the PC. The actual update can be carried out on site on an installed OTT Pluvio² S: Unscrew the three knurled screws on the pipe housing. Remove pipe housing. Remove cover of USB interface and connect the OTT Pluvio² S to the PC with a USB cable; see OTT Pluvio² S manual, fig. 23. Start operating program. Click on "Connect" -> the operating software establishes a connection to the OTT Pluvio² S and calls various status information Choose "Firmware update" (-> operating software shows the currently installed firmware version) Click on "Start the firmware update" Confirm warning with "Yes" -> a window opens where you can choose the new firmware (file "7003030293_Vxxxx_Pluvio2_L_S.bin). Choose the downloaded file and click on "Open" -> the operating program transfers the firmware into the OTT Pluvio² S. (After the update OTT Pluvio²S will start the new firmware and resumes automatic operation.) Quit operating program. Remove USB cable. Replace the cover for the USB interface. Empty the collecting bucket if necessary. Align and replace the pipe housing. Tighten the three knurled screws again.
7003030993_V1062_Pluvio2_L_S.bin (452,4 KB)

Release notes

Data Sheet - OTT Pluvio 2S - EN

Download, 244.64 KB

OTT Pluvio² / OTT Pluvio² S / OTT Pluvio² L - Operating program

Version: V 1.08.7

Comments

Release notes

OTT Pluvio² - USB interface driver - EN

Version: V 2.12.36.4

Comments

Leaflet - Compact weighing precipitation gauge OTT Pluvio² S

Download

OTT Pluvio² S - Konformitätserklärung | Declaration of Conformity | Declaration de Conformité

Download

MF pro Firmware - EN

Version: 2.08

Comments

Release notes

OTT QReview - EN

Version: V 3.13.0

Comments

Release notes

Leaflet - Magnetic -inductive current meter OTT MF pro

Download

OTT MF pro Operating Instructions

Download

OTT ecoLog 1000: Data Formats

V4

Download, 676.03 KB

OTT ecoLog 1000 Control File FTP

V2

Download, 215.49 KB

Whitepaper - OTT ecoLog Guidance: Remote communication via mobile networks

Download

OTT ecoLog 500 Video - EN

OTT ecoLog 500 Video

Watch on Youtube

Brochure - SUTRON SatLink 3 Lite GOES Logger / Transmitter - EN

Download, 2 MB

Quick Start Guide SUTRON SATLINK 3

Download

Operations & Maintenance Manual SUTRON SATLINK 3

Download

SatLink3 Lite Certification – GOES

Download, 209.2 KB

SatLink3 Lite Certification – CE DoC

Download, 776.81 KB

SatLink3 Lite Certification – FCC/ICES SDoC

Download, 271.49 KB

Information - GPS Status Jan 2019

Download, 288.65 KB

Operating instructions Groundwater Datalogger OTT ecoLog 1000

Download

Brochure - Groundwater level logger with remote data transmission 4G/2G OTT ecoLog 1000

Download

OTT ecoLog 1000 Toolbox

Version: 1.05.0

Comments

Release notes

OTT ecoLog 1000 – Available SMS commands

Download

OTT MF pro Video - EN

Watch on Youtube

Pluvio² / Pluvio² S / Pluvio² L - Operating program
OTT Pluvio² - Operating program
V 1.08.7
E
05.04.2018
Please note: from version 1.08.1 the operating software needs version 2.12.00 (or higher) of the USB-infterface drivers for OTT Pluvio² / ... L / ... S. If required please download the USB-interface drivers as well and install them on your PC! How to install the update: Download the file "Setup_Pluvio2_Pluvio2SOP_Vxxxx_EN.exe" to your PC. Start the file "Setup_Pluvio2_Pluvio2SOP_Vxxxx_EN.exe" -> the "InstallShield Wizard" (installation program) opens. Follow the installation instructions on the screen.

Pluvio² – USB interface driver
OTT USB interface driver for OTT Pluviol² / OTT Pluviol² L / OTT Pluviol² S
V 2.12.36.4
E
2022-06-02
Installation Guide: www.ftdichip.com/wp-content/uploads/2022/05/AN_396-FTDI-Drivers-Installation-Guide-for-Windows-10_11.pdf
CDM212364_Setup.exe (2,2 MB)

MF pro
OTT MF pro
2.08
E
2023-03-17
Prepare update: Download the file "OTT_MF_pro_208_Firmware_Update.zip" to your PC. Unzip this file. If not already done: install the "PVM Utility" (Software for updating the OTT MF pro): Start the file "setup.exe" in the directory "PVMSetup_1-6-0-0" -> the "InstallShield Wizard" (Installation program) opens. Follow the installation instructions on the screen. How to update the OTT MF pro Firmware to Version 2.08: Switch on the OTT MF prohandheld and choose the "Setup" \| "USB" menu. Select the USB mode "CDC" and confirm with "OK". Start the PVM Utility by double-clicking the program icon. Connect the operating device and the PC with the USB connection cable. Click on "Connect" and then select the COM port used. After the connection has been established, the PVM Utility displays information about the OTT MF pro (serial number, etc.). Click on "Firmware update" in the "Views" window. In the "Meter" tab, click on "Browse" and select the "Firmware" directory (in "OTT MF pro 2.08 Update"). Then select version 2.08 from the drop-down menu and click "Start" -> the update will start. During the update the display of the OTT MF pro is switched off. After successful completion a message appears on the PC screen, the OTT MF pro is automatically reset and restarted after a few minutes. Please note: To install the PVM Utility you need administrator rights on the PC! The PVM Utility is only available with an English user interface! This description differs slightly from the description in the OTT MF pro manual. Please proceed as described here!
OTT_MF_pro_208_Firmware_Update.zip (2,3 MB)

QReview
OTT Software QReview
V 3.13.0
E
2024-01-08
How to install the update: If your former QReview version is still running: quit the program. Recommendation: Save QReview user data in an extra directory outside the program directory and uninstall the former QReview version completely. Download the file "QREview_setup_EN_XXXX.exe" to your PC. Start the file "QReview_setup_EN_XXXX.exe" -> the "InstallShield Wizard" opens. Follow the instructions on the screen. After the installation QReview starts with English user interface. Please note You must have the write permission for the directory "C:\Program Files\OTT\QReview" (e.g. administrator login). Change language of QReview user interface: choose menu "Settings" -> "Language". Select language from the window.
QReview_setup_EN_3130.exe (6,1 MB)

ecoLog 1000 - Toolbox
OTT ecoLog 1000 Toolbox Software (Addition to the operating software "LinkComm")
1.05.0
E
2023-02-23
The OTT ecoLog 1000 Toolbox Software supports the planning and implementation of an OTT ecoLog 1000 application: calculation of the battery lifetime depending on the OTT ecoLog 1000 configuration calculation of the IP transmission data volume depending on the OTT ecoLog 1000 configuration creation of FTP command files for 2-way communication via FTP server The software makes it possible to enter settings directly or import an existing OTT ecoLog 1000 configuration. Please note: Software for Microsoft Windows Operating System (Version 10). The language of the user interface can be selected from the main menu after the first start (German or English). How to install and use the software: Download the file "EL1kToolbox.exe"to your PC. Start the OTT ecoLog 1000 Toolbox e.g. by double clicking on the file "EL1kToolbox.exe".
EL1kToolbox.exe (9,8 MB)

Search

30 results found for „test“