toggle menu

Sutron CDMALink 2-Way Logging Transmitter

Multi-Sensor Input Logger with CDMA Com and WiFi Capability

The CDMALink provides simple telemetry anywhere. CDMALink has two purposes:
(1) To collect and store data from meteorological and hydrological sensors, and (2)
to send that data wirelessly to a central system, phone or other station.

CDMALink includes a quad band GSM cell phone modem that can operate when the unit is
within range of a cell phone network of companies like Sprint and Verizon.
  • WiFi, USB-Host, Cellular, Data Logger
  • CDMA Data logger with built-in Wifi for easy communication to the logger from the Sutron Mobile application
  • SDI-12, RS485
Request a quote or advice

Easy-to-use Software includes setup program.
Terminal strip with screw terminals for I/O and power connections
Operates 8-16VDC
TCXO real-time clock with battery backup (+/-4ppm)
Built-in solar panel regulator
Support for up to 16 measurements of the following inputs:

  • SDI-12/RS485 (shared as is done in the Bubbler)
  • 5 Analog inputs:
    1. Two (2) single ended inputs (range 0-5V)
    2. Two (2) differential inputs (range +/-39mv, +/-312mV, +/-2.5V) 3. One (1) 4-20mA input
  • 2 digital inputs. They can be used for tipping bucket, frequency, and on/off inputs
  • internal temperature
  • Battery voltage

Options to average or accumulate any measurement.
Lightning protection (Gas Tube) on all external inputs.
User specified equation on any measurement .
User specified alarm detection on any measurement.
2 LED for verification/diagnostics.
Log capacity of 240K of data accessible via GPRS and direct connect
Switched Battery Output
Also operates as a standalone recorder without Telemetry
USB slave for serial connection to PC. THE USB PORT WILL NOT SUPPORT typical USB devices like memory sticks, modems, etc.
RealTime Clock operates with internal lifetime battery

Telemetry via CDMA
1. Periodic transmissions at user set times with data in user selectable format (pseudobinary B, C, SHEF & ASCII)
2. Support for primary and secondary master stations via CDMA
3. Alarm transmissions as they are detected.
4. Diagnostics to help track of the amount of data being sent and the performance of the telemetry
5. Support for remote commands for data collection, maintenance or control of two on/off devices
6. Optional authentication of incoming messages to insure they are from a trusted source & optional authentication of messages sent to

SUTRONWIN via CDMA
7. SMS transmissions if CDMA fails or in place of CDMA
8. Extremely affordable
9. CDMA modems use wireless cellular technology and provide data access in most areas where a typical cell phone works.

  • Surface Water Level, Flow & Quality
  • Groundwater Level & Quality
  • Offshore X-Linking
  • Mining / Geotechnical
  • Weather X-Linking & Warning
  • Oceanic X-Linking & Warning
  • Oil & Gas Production
  • Any Low-Power, Remote Data Acquisition System
Sutron LinkComm Mobile Guide
Back