Sea-Bird Scientific HydroCycle-PO4 Phosphate Sensor
High accuracy in-situ phosphate measurement
La méthodologie Cycle P repose sur les méthodes standards de l’EPA des États-Unis et combine la fluidique de précision et une optique de pointe pour offrir une précision et une exactitude sans égales. Le capteur HydroCycle P convient parfaitement à la surveillance automatique et intègre des cartouches de réactifs pré-mélangés ainsi que des normes d’étalonnage.
- Installation à poste fixe
- Phosphate
- Durée de vie des réactifs de 5 mois, limite de détection de 2,3 μgP/L, cartouches de réactif encliquetables, norme NIST intégrée, > 1 500 échantillons/service, étalonnage en usine
- SDI-12
- Robustesse : Des grilles en cuivre et des filtres d’admission en acier inoxydable 10 µm offrent une excellente capacité antisalissure.
- Précision : Cellule optique de résolution nanomolaire et insensible à la diffusion.
- Bon rapport coût-efficacité : Plus de 1 000 échantillons, y compris l’étalonnage par dopage intégré pour l’AQ/CQ, durée de déploiement.
| | |
| |
Download PDF
Download PDF
Mechanical | |
Height (w/handle) | 56 cm |
Width | 18 cm |
Weight in air | 6.8 kg (w/ reagents) |
Weight in water | 0.37 kg |
Depth | 200 m |
Temperature *1 | 0 ... 35 °C |
Electrical | |
Input | 10.5 ... 18 VDC |
Current draw | 3.0 A max; 115 mA avg |
Data output | RS-232 / SDI-12 |
Host Connector | MCBH-6-MP |
SDI Connector | MCBH-8-MP |
Sample rate | 2 per hour |
Data memory | 1 GB |
Optical | |
LED wavelength | 870 nm |
Pathlength | 5 cm |
Linearity | equal or greater than 95% R2 |
Analytical | |
Detection limit, three standard deviations of 18 MOhm water | equal to or less than 0.0023 mg/L PO4-P |
Quantification limit, ten standard deviations of 18 MOhm water | equal to or less than 0.0077 mg/L PO4-P |
Standard deviation of standard solution of 2.6 µM | equal to or less than 0.0015 mg/L PO4-P |
Range, nominal *2 | 0-0.3 mg/L PO4-P |
Note: | *1 Both storage and operating temperature for sensor and reagent cartridges. *2 Higher range is possible (0 ... 40 µM, 0 ... 1.2 mg/L PO4-P) but is outside specifications mg/L PO4-P refers to mg of atoms phosphorus per liter measured in the form of reactive phosphate. ppm ~ mg/L, ppb ~µg/L Specifications are subject to change without notice. |